Nickel PS chokes.

Design and use of Chokes for PS, anode and filament use.
Post Reply
dave slagle
Posts: 2038
Joined: Sat Jan 22, 2005 3:54 am
Location: NYC
Contact:

Nickel PS chokes.

Post by dave slagle »

this is coming here full stride and is for the same amp that the 6K ouputs in the transformer section.

design is dual power supply for a 3A/176m 300B amp. 50ma chokes are for the input and 150ma chokes for the OT.

You have a choice between inductance and DCR for the 50ma choke.

edit.

who am i to limit your choices on the 150ma choke. I temporarily forgot that they were for different supplies so similar values and DCR's might actually be a plus. I attached the plots for a lower DCR version below.
Attachments
here is the lower DCR 150ma choke.
here is the lower DCR 150ma choke.
image001.gif (6.62 KiB) Viewed 4679 times
Higher DCR 150ma choke
Higher DCR 150ma choke
image001.gif (12.89 KiB) Viewed 4687 times
higher DCR 50ma choke
higher DCR 50ma choke
image001.gif (8.56 KiB) Viewed 4687 times
this is the lower DCR 80% nickel choke.
this is the lower DCR 80% nickel choke.
image001.gif (7.98 KiB) Viewed 4687 times
Post Reply