CAD model of attenuator

discussion of magnetic volume control design for both line and speaker levels.

Post Reply
dave slagle
Posts: 2085
Joined: Sat Jan 22, 2005 3:54 am
Location: NYC
Contact:

Post by dave slagle »

I do not have a 3d cad model but I have attached a screen grab of the circuit board. The yellow circle is 0.375" for the switch mounting hole.
Attachments
Screen Shot 2021-01-30 at 8.16.06 AM.png
Screen Shot 2021-01-30 at 8.16.06 AM.png (154.35 KiB) Viewed 3341 times
Get Your Fix
www.hifiheroin.com
dave slagle
Posts: 2085
Joined: Sat Jan 22, 2005 3:54 am
Location: NYC
Contact:

Post by dave slagle »

1.35" X 1.85"

dave
Get Your Fix
www.hifiheroin.com
Post Reply