PCB footprint?
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
PCB footprint?
Hello, I can't find a footprint anywhere on the website for Dave's AVC. I want to install it on a PCB, but obviously I need to pinout and the footrpint in order to do that. Thanks.
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
Grid pitch is 0.1"
pads are 0.115" with a 0.045" plated through hole
I use sprint PCB and am not sure if the macros are useable in other programs but can provide it if you want.
dave
pads are 0.115" with a 0.045" plated through hole
I use sprint PCB and am not sure if the macros are useable in other programs but can provide it if you want.
dave
- Attachments
-
- Screen shot 2015-08-05 at 9.15.12 AM.png (18.55 KiB) Viewed 10975 times
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
and the last dimension? I guess you call it "thickness"??? It looks like an inch or so? I need to know so that it fits in my box.dave slagle wrote:1.6 x1.8" is the size. the metal bar can be left off.
The Sowter TVC is too tall @ 65mm, and they cannot make a custom version with PC pins (too many they said).
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
about 1.25" above the PCB. I would contact me privately prior to getting the boards done so we can talk about the actual application in more detail.
dave
dave
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
the pinout can be whatever you want it to be. For the $200 units it is the picture. It is important to note that there are two flying leads to get 16 positions.
dave
dave
- Attachments
-
- Screen shot 2015-08-21 at 10.06.54 AM.png (24.92 KiB) Viewed 10915 times
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
I don't see any flying leads in this photo. It's not a big deal, but I'll have to wait until I have the attenuators in hand before finishing the test boards.
http://www.intactaudio.com/images/Atten ... AVC_Lg.jpg
http://www.intactaudio.com/images/Atten ... AVC_Lg.jpg
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm
-
- Posts: 56
- Joined: Sat Jul 25, 2015 9:50 pm