Autoformer volume control problem
-
- Posts: 64
- Joined: Fri Aug 15, 2014 2:48 pm
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
-
- Posts: 64
- Joined: Fri Aug 15, 2014 2:48 pm
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
then restack them with all the E-s on one side and all the I's on the other as shown in the link above.
dave
dave
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 64
- Joined: Fri Aug 15, 2014 2:48 pm
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 64
- Joined: Fri Aug 15, 2014 2:48 pm
-
- Posts: 64
- Joined: Fri Aug 15, 2014 2:48 pm
-
- Posts: 64
- Joined: Fri Aug 15, 2014 2:48 pm
-
- Posts: 2091
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
I would put it before the filter since the small cap will resonante with the primary L in the 100hz range.
dave
dave
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 1
- Joined: Wed Apr 13, 2016 2:24 am
problem use AVC with volume control preamp
Hello Dave,
I try to use AVC with my preamp tube 4P1L connect to ouput transformer Lundahll LL1692A, but the gain too loud.
I attach my AVC
Thank you
Haryono
I try to use AVC with my preamp tube 4P1L connect to ouput transformer Lundahll LL1692A, but the gain too loud.
I attach my AVC
Thank you
Haryono
- Attachments
-
- DSC01431.JPG (3.19 MiB) Viewed 10478 times