Garage Sale

your own private (or public place) to document whatever.
dave slagle
Posts: 2085
Joined: Sat Jan 22, 2005 3:54 am
Location: NYC
Contact:

Garage Sale

Post by dave slagle »

See the attachments below for stuff that needs to go. New Stuff always appears at the top.

Paypal preferred but other methods accepted.

dslagle@earthlink.net

dave
Attachments
Single dual bobbin choke on a Large amorphous core.  Approximate dimensions are 5X5X5 inches and weight is just under 10 pounds.  Two windings on a split bobbin for series / parallel connection.  $200
Single dual bobbin choke on a Large amorphous core. Approximate dimensions are 5X5X5 inches and weight is just under 10 pounds. Two windings on a split bobbin for series / parallel connection. $200
Picture 5.png (28.56 KiB) Viewed 6469 times
single large amorphous choke wound with 5X26 litz wire.  could be used as a low current high inductance PS choke or as a filament / offset winding choke.  $200 (will wind a mate for $200 if a pair is needed)
single large amorphous choke wound with 5X26 litz wire. could be used as a low current high inductance PS choke or as a filament / offset winding choke. $200 (will wind a mate for $200 if a pair is needed)
Picture 6.png (66.65 KiB) Viewed 6469 times
Pair of large 25:1 amorphous outputs.  Originally intended for biamping,  A cancel winding can be added to up the inductance for full range.  Size is 5X5X5 and they weigh in at just under 10 pounds each.  $500
Pair of large 25:1 amorphous outputs. Originally intended for biamping, A cancel winding can be added to up the inductance for full range. Size is 5X5X5 and they weigh in at just under 10 pounds each. $500
Picture 4.png (87.16 KiB) Viewed 6469 times
Small 80% nickel PS choke gapped for the reqired current.  34 ohm DCR. all brass hardware $65.
Small 80% nickel PS choke gapped for the reqired current. 34 ohm DCR. all brass hardware $65.
Picture 8.png (25.02 KiB) Viewed 6675 times
Small 80% nickel PS choke gapped for the reqired current.  54 ohm DCR. all brass hardware $65.
Small 80% nickel PS choke gapped for the reqired current. 54 ohm DCR. all brass hardware $65.
Picture 9.png (24.46 KiB) Viewed 6675 times
Vintage Stancor bobbin placed on an 80% nickel core.  Currently gapped for 40hy 20ma 580 ohm DCR all brass hardware.  $75
Vintage Stancor bobbin placed on an 80% nickel core. Currently gapped for 40hy 20ma 580 ohm DCR all brass hardware. $75
IMG_3537.JPG (56.46 KiB) Viewed 6675 times
Pair of Amorphous Plate/PS chokes. 240 ohms DCR  Gapped for desired current open frame Not for choke input. Approximate size 2X3X3 $200
Pair of Amorphous Plate/PS chokes. 240 ohms DCR Gapped for desired current open frame Not for choke input. Approximate size 2X3X3 $200
Picture 6.png (24.66 KiB) Viewed 6678 times
Last edited by dave slagle on Tue Sep 25, 2007 1:24 am, edited 3 times in total.
dave slagle
Posts: 2085
Joined: Sat Jan 22, 2005 3:54 am
Location: NYC
Contact:

updated.

Post by dave slagle »

removed the sold stuff and added some new stuff.

dave
Post Reply