Hello David,
I know you state this IT is for use with DHT's, but I'm wondering.
My fave output tube is a triode strapped EL84 or SV83. Main reason is I've got loads of HQ tubes of each, and I love how they sound triode strapped SE.
Would this IT work well driving the EL84.
Say from a 6922 or 6N1P, or another EL84 driving EL84 Sakuma San style ?
As always, thanks in advance for your advice.
Cheers, Crazy Bill
Current cancellation w/ IDHT tube
-
- Posts: 17
- Joined: Tue Jan 29, 2008 2:43 am
-
- Posts: 2092
- Joined: Sat Jan 22, 2005 3:54 am
- Location: NYC
- Contact:
I presume the IT will be a 1:1 I between the two el-84's. If so, I can look into how small I can go next week and report back.
Dave
Dave
Get Your Fix
www.hifiheroin.com
www.hifiheroin.com
-
- Posts: 17
- Joined: Tue Jan 29, 2008 2:43 am
-
- Posts: 17
- Joined: Tue Jan 29, 2008 2:43 am
Hello Dave,
Your reply got me thinking that the current cancellation scheme is really for current requirements that are greater than what I will need. I'll be using either the 6922 listed above, or a 6N1P-EV ( 200v @ 10ma ). Would it be better in this case to wind me a 1:1 bifilar on a nickel core sized for these currents.
Thanks, Bill
Your reply got me thinking that the current cancellation scheme is really for current requirements that are greater than what I will need. I'll be using either the 6922 listed above, or a 6N1P-EV ( 200v @ 10ma ). Would it be better in this case to wind me a 1:1 bifilar on a nickel core sized for these currents.
Thanks, Bill