Hi,
it seems that Stephie is active again
Maybe we might continue our discussion about filament modelling we did some years ago about ER300B.
I recently got new tube EML12B and tried to re-work the approach for this tube. Unfortunately I do not have enough experimental data. Only what Jac published on his page about the EML300B which has a similar filament. The filament is a slow turning on one.
Maybe Stephie could take a look if the model makes sense or not. The goal was to simulate the tube under real conditions
What I do not understand up to now how these B112 and other are normalized to 1V.
DHT filament modeling
DHT filament modeling
- Attachments
-
- dht_fil_draft.JPG (606.24 KiB) Viewed 8400 times
-
- NEW_EML12B_Filament_BA_mk2_trans.asc
- (9.94 KiB) Downloaded 252 times
-
- EML12B_fil_switchon_trans.asc
- (1.44 KiB) Downloaded 259 times
-
- EML12B_filament_mk2.inc
- (3.36 KiB) Downloaded 258 times