Page 1 of 1

6GB5/EL500

Posted: Sat Mar 02, 2013 8:12 pm
by nanana
hey stephie, if you are out there...
i am sure you have a lot going on... but i wish to ask you for a big favor...

could you take a look at this tube and conjure me (us) up a model please?! i am working on an article... and i have built some gadgets with it, but would love to work out some extended variations without soldering.

the smaller, low voltage high current/high perveance tubes are interesting for some of us... i imagine.

this tube and the 6AV5 are wonderful... i have used them a fair bit. and there are inexpensive quantities of them around. the russian version is excellent (6P36S and i suspect the 6P44S).

i understand if you have no time, but it would be greatly appreciated.

thanks in advance,
your
jc morrison

Posted: Tue Mar 05, 2013 8:57 pm
by sbench
Hi,
I'll work on that one in about a week. Sorry for the delay but my sis's mom (my step mom) just passed away unexpectedly and we are heading to Ohio for the funeral. (Taking the red eye from San Diego to Philly to Dayton Ohio tonight). I'll probably use one of the "new models" that I am working on, so it's likely to be pretty true to the actual characteristics, but since I'm refining the generic prototype, it will also be "unique" from a prototype viewpoint.

I hope to have a generic model and Spice build program that allows us to basically enter the published characteristics, and then simply refine (tweak) the values to hit the curves.

Warmest Regards,
Stephie <3

Posted: Tue Mar 05, 2013 9:49 pm
by nanana
thanx stephie... you'll get a major shout out for this. if i can do anything for you, please just ask.
sorry for your loss... take care!


your,
jc

UL curves

Posted: Sat Jan 09, 2021 8:52 pm
by GUNFU
Hi Steve. What could be wrong? UL curves are not real. Wrong models?

Posted: Wed Jan 13, 2021 9:06 pm
by nanana
the curves work perfectly. click on the generators. they are plotted "upside down" from convention, but still good nonetheless.

I found a bug.

Posted: Thu Jan 14, 2021 8:17 am
by GUNFU
No, they are not good enough. I found a bug. It is necessary to rearrange the controlled and non-controlled voltage sources in places.

Curves in pentode, triode, UL with cathodic feedback.

Posted: Thu Jan 14, 2021 10:45 am
by GUNFU
I have modified my simple circuit for taking ultra-linear curves, as well as in the pentode and triode. Now it not only works accurately, but also captures curves with cathodic feedback too.
Curves in pentode, triode, UL with cathodic feedback.