Page 1 of 1
6336B model
Posted: Wed Nov 03, 2010 1:58 pm
by jarek
Hi all!
Been long time since posted here
...anybody has
a reliable model of 6336B? Esp. for high volatge/low current?
One section (30W)
I've found something here:
http://www.ne.jp/asahi/evo/amp/CSPP/6336.htm
(scroll down to about 3/4 or search for "spice" on the page)
but I think it's for 2 sections.
Cheers,
jarek
6528
Posted: Wed Nov 03, 2010 4:13 pm
by jarek
...and 6528
Posted: Thu Nov 04, 2010 7:52 pm
by sbench
Here's both. Let me know how it works out. The 6336 is the "A" (5 amp heater) from the Raytheon tube curves. The 6528 likewise uses the Raytheon tube curves, although I strongly suspect those curves are in error for Vg=-20 volts and above 100mA and subtly incorrect for Vg=-50 volts, as the published shape is not "consistent".
Stephie >3
Posted: Fri Nov 05, 2010 3:53 am
by jarek
Steve, you are the guy!
THanks!
Posted: Fri Nov 05, 2010 1:28 pm
by sbench
Hee Hee Hee. No need to insult me.
I haven't been a guy for a few years now.
Let me know if those work out OK. They seem to follow the curves reasonably well, except for what I consider a drawing error on Raytheon CK6528 curves.
BTW, here's a recent "me".
Hugs,
Stephie
Posted: Wed Mar 09, 2011 4:06 pm
by jarek
Ooops! My apologies Stephie, had no idea
Steve, once again thanks for the model but I've abandoned this tube,
in favour of a simple EL34, so could not check your model in the real life
best,
jarek
Posted: Fri Mar 11, 2011 6:13 pm
by sbench
Not a problem, I embarassed myself there for a while. Can't describe how much better I am now though.
EL34 is a pretty nice critter, and nice equally in triode mode. Tetrodes in triode offer some interesting options, since you can make the triode connection via a resistor, and that leads to some interesting changes.
Warmest Regards,
Stephie <3